@article { author = {Sadrinasab, Masoud and Einali, Abbas and Akbarinasab, Mohammad and Najarpour, Mohammad Ali}, title = {Numerical Modelling of Arvandrud River Plume and the impact of wind and River Discharge on the plume structure By Three Dimensional and Hydro dynamical Model (FVCOM)}, journal = {Journal of Marine Science and Technology}, volume = {20}, number = {3}, pages = {12-30}, year = {2021}, publisher = {Khorramshahr University of Marine Science and Technology}, issn = {2008-8965}, eissn = {2538-5380}, doi = {10.22113/jmst.2019.122183.2135}, abstract = {Arvandrud River Plume which is the main source of fresh water in the Persian Gulf and in addition its catchment area is settlement for about 54 million people is one of the most important phenomena in costal zones. . The river is the boundary line between Iran and Iraq and its plume extended in Iran, Iraq and Kuwait territory in Persian Gulf. Oceanographic studies are infeasible in the river and in its mouth due to geographic, politics, and security problems in the region. Despite the lack of in-situ data, this study is a serious step to the investigation to river plume. In this study salinity, temperature and water circulation of Persian Gulf were simulated by using oceanographic hydrodynamic model, FVCOM. Then, effects of wind and river discharge on structure of Plumes were investigated. For this purpose, 14 wind and 8 river discharge conditions have been used. The results show the river has a surface-advected plume that is highly affected by wind. The river plume area decreased with increasing wind speed. Three types of plumes were formed by different wind conditions, at the mouth of the river. Plume type 1 diverted toward the northwest coast of Persian Gulf and plume type 3 diverted toward the Kuwait coast. Plume type 2 was almost straight and was not diverted to the sides. The T-S diagram of surface water mass was very similar to all three modes, as a result, the plume shape and displacement is affected by wind.}, keywords = {Arvandrud river,River plume,river discharge,FVCOM}, title_fa = {شبیه سازی پلوم رودخانه اروند و بررسی اثر باد و دبی رودخانه بر ساختار آن با استفاده از مدل اقیانوسی هیدرودینامیکی سه‌بعدی FVCOM}, abstract_fa = {پلوم رودخانه اروند که اصلی­ ترین منبع آب شیرین برای خلیج فارس بوده، حوضه آبریز آن سکونت ­گاه حدود 54 میلیون نفر انسان در منطقه است، از پدیده­ های مهم در مناطق ساحلی است. رودخانه اروند، مرز دو کشور ایران و عراق بوده، پلوم آن در خلیج فارس در قلمرو سه کشور ایران، عراق و کویت شکل می­ گیرد. این موضوع به ­همراه مشکلات سیاسی و امنیتی منطقه و همچنین کم ­عمق بودن دهانه رودخانه، علت کمبود اندازه ­گیری­ های میدانی در منطقه و ناشناخته ماندن دبی رودخانه اروند است. با وجود مشکلات ناشی از کمبود داده‌های میدانی، این مطالعه از جدی­ ترین تلاش ­ها برای درک ساختار پلوم این رودخانه مهم است. در این تحقیق، چرخش آب و دما و شوری خلیج فارس، با استفاده از مدل FVCOM مدل ­سازی شد. سپس حساسیت ساختار سطحی پلوم رودخانه اروند نسبت ­به تغییرات دبی و باد مورد بررسی دقیق ­تر قرار گرفت. به این منظور 14 حالت مختلف باد به ­علاوه 8 حالت مختلف دبی به مدل اعمال شد. نتایج نشان داده که پلوم رودخانه اروند از نوع «پلوم گسترده در سطح» است و حساسیت بالایی نسبت ­به تغییرات باد دارد. افزایش سرعت باد، عموما سبب کاهش مساحت پلوم شد. حالت­ های مختلف باد سبب ایجاد سه نوع پلوم در دهانه این رودخانه شد. در نوع اول پلوم به سمت سواحل شمال ­غربی خلیج فارس و در نوع سوم به سمت سواحل کویت منحرف می­شود. در نوع دوم پلوم در امتداد مسیر ورود آب رودخانه به دریا حرکت کرده، به طرفین منحرف نمی ­شود. این جابجایی پلوم صرفا به دلیل جابجایی توده آّب سطحی است.}, keywords_fa = {اروندرود,پلوم رودخانه,دبی,FVCOM}, url = {https://jmst.kmsu.ac.ir/article_81457.html}, eprint = {https://jmst.kmsu.ac.ir/article_81457_1e493ea05789e2b57bd84259ccee58fb.pdf} }