@article { author = {Dezvareh, Reza and Mohammadi, Parisa and Hajitabar, Mohammad}, title = {Determination of wind-induced wave characteristics by numerical model WaveWatch-III and compare its results with Mike21- SW}, journal = {Journal of Marine Science and Technology}, volume = {18}, number = {2}, pages = {53-65}, year = {2019}, publisher = {Khorramshahr University of Marine Science and Technology}, issn = {2008-8965}, eissn = {2538-5380}, doi = {10.22113/jmst.2019.142502.2186}, abstract = {Wind-induced waves due to their high energy are one of the most important hydrodynamic phenomena in the sea, which are of particular importance in marine engineering. Considering the importance of prediction of wind-induced waveforms, in this study, the efficiency of the third-wave waveguide model in wave prediction (WaveWatch-III) has been investigated and the results of this model have been compared with the wave height obtained from the SW module software MIKE Is. In other words, in this paper, the prediction of wave characteristics is provided by the WW3 and SW models. To better compare the results of these two models, the environment and wind speed are considered to be the same. The results show that the WW3 conforms well to the results of the SW model, which will decrease with increasing water depth and distance from the coast, so that in deep water (approximate depth of water 500 m) and at intervals Offshore (50 km off the coast), the SW model provides more and more conservative data for wave characteristics. Also, the results of this study showed that the WW3 model would take more time to reach a steady state.}, keywords = {Wind-induced waves,Wave prediction,Third-generation WW3 model,Commercial software MIKE21}, title_fa = {تعیین مشخصه های امواج ناشی از باد به کمک مدل عددی WaveWatch-III‌ و مقایسه نتایج آن با مدل Mike21-SW}, abstract_fa = {امواج ناشی از باد به دلیل انرژی بالای خود یکی از مهم‌ترین پدیده‌های هیدرودینامیکی دریا هستند که از اهمیت ویژه‌ای در مهندسی دریا برخوردار می‌باشند. با توجه به اهمیت پیش‌بینی مشخصات امواج ناشی از باد، در این مطالعه کارایی مدل عددی نسل سوم موج در پیش‌بینی امواج (WaveWatch-III) مورد بررسی قرار گرفته و نتایج این مدل، با ارتفاع موج بدست‌آمده از ماژول SW نرم‌افزار MIKE مقایسه شده است. به عبارت دیگر در این مقاله روش پیش‌بینی مشخصه‌های موج به کمک دو مدل WW3 و SW ارائه می‌شود. برای مقایسه بهتر نتایج این دو مدل، محیط و سرعت باد یکسان در نظر گرفته‌شده است. نتایج حاصل نشان می‌دهد که تطابق خوبی مدل WW3 با نتایج مدل SW دارد که این تطابق با افزایش عمق آب و فاصله گرفتن از ساحل، کم خواهد شد به نحوی که در آب‌های عمیق (عمق آب تقریبی ۵۰۰ متر) و در فواصل دور از ساحل (۵۰ کیلومتری از ساحل)، مدل SW مقادیر بیشتر و محافظه‌کارانه‌تری برای مشخصات موج پیش‌بینی می‌کند. همچنین نتایج این تحقیق نشان داد که مدل WW3 مدت زمان بیشتری می‌بایست صرف کند تا به حالت پایدار برسد.}, keywords_fa = {امواج ناشی از باد,پیش بینی امواج,مدل نسل سوم WW3,نرم افزار تجاری MIKE21}, url = {https://jmst.kmsu.ac.ir/article_87438.html}, eprint = {https://jmst.kmsu.ac.ir/article_87438_93c12264051d066f96d77dc68224bd7a.pdf} }