Document Type : Original Manuscript
Author
Naval Architecture and Marine Engineering, Faculty of Marine Engineering, Khorramshahr University of Marine Science and Technology, Khorramshahr, Iran.
Abstract
Calculating the forces acting from the fluid to different structures is a field of interest to many researchers. Lift and drag forces are the most important parameters in the hydrofoil issues. Given that the Newtonian Fluid assumption is common in most studies in this field; in this paper, the forces imposed on a hydrofoil in a laminar non-Newtonian fluid flow have been investigated. The model is Power law for non-Newtonian fluid, and is simulated for three dilatants, Newtonian and pseudo plastic fluid at angles of attack of zero, 5, 10, 15, 20 and 25 degrees, and behavior indexes of 0.5, 1 and 1.5 is considered. Creating Mesh, Processing, and Post-Processing Computing This research is done by three free and open source softwares, G-Mesh, Open FOAM, and Para view. For validation, the lift and drag coefficients in the behavior index 1, that's mean Newtonian fluid, are consistent with similar results. As the angle increases, the dilatant fluid separation phenomenon occurs earlier; also Lowering lift coefficient for this concentrated fluid occurs at a larger angle of attack.
Keywords
Main Subjects
)